The DF6 brings 4-stroke performance and efficiency to portable outboards. Compact and lightweight, the DF6 is easy to transport and delivers surprising low- and mid-range torque for quick acceleration.
Knowing that small portables like the DF6 get transported a lot, we set out to design this outboard compact and lightweight to make transporting easier. Not to stop there, we added features that would make its operation easy and more user friendly. As four-strokes, the DF6 outboard deliver clean, economical operation, and being made by Suzuki, you know it delivers excellent power, performance, and durability.
Powering the DF6, is a single-cylinder 4-stroke OHV engine with a large displacement of 138cm3. Its excellent mid-range torque combined with light weight results in excellent acceleration. Also, four-stroke operation provides the DF6 with greater fuel-efficient operation, less vibration and quiet operation while eliminating the need for mixing oil with the fuel, etc. This keeps your boating experience clean, pleasant and user friendly.
Equipped with a tiller handle that extends out from the long steering bracket. This design positions the operator further forward in the boat to provide better weight distribution which, helps in getting an inflatable to plane quicker. The outboard is designed to turn 90-degrees both left and right of center. This feature helps docking and tight turning of the boat while its 90-degree stopping points provide an easy to recognize reference of the outboard’s angle. With the tiller handle attached to the steering bracket rather than the motor itself, and the utilization of a large rubber mount inside the same steering bracket, vibration in the tiller handle has been greatly reduced.
ARRYING AND TILT UP HANDLE
Carrying the outboard is made easier with the incorporation of a large, ring shaped carrying handle. Designed with smooth edges and lacking any sharp angles, the large carrying handle offers plenty of space for both hands. A tilt up handle built into the backside of the engine cover offers easy tilting of the outboard. Pulling back on the handle makes tilting of the engine from the normal drive position to any one of the two shallow water drive positions or tilt up position a simple operation.
PILOT WATER HOLE AND FRESH WATER FLUSHING SYSTEM
The pilot water hole is located upstream of the cylinder to confirm that there is water circulation soon after the motor is started. The pilot water hole’s water inspection tube is removable to permit cleaning of the tube and the attachment of an optional connector that allows freshwater flushing of the water jacket.
INTEGRAL FUEL TANK
Equipped with a built-in 1.5-liter fuel tank that is the largest fuel tank offered in the same fourstroke class.
|RECOMMENDED TRANSOM HEIGHT (INCHES)||S: 15 L: 20|
|WEIGHT LBS||S: 53 L: 55|
|ENGINE TYPE||OHV 2-Valve|
|FUEL DELIVERY SYSTEM||Carburetor|
|NO. OF CYLINDERS||1|
|PISTON DISPLACEMENT INCHES (CC)||8.4 (138)|
|BORE X STROKE INCHES (MM)||2.44 x 1.81 (62 x 46)|
|MAXIMUM OUTPUT HP||6|
|OPERATING RANGE (RPM)||4750 – 5750|
|OIL PAN CAPACITY QUARTS (LITER)||.74 (.7)|
|IGNITION SYSTEM||Digital CDI|
|ALTERNATOR||12V 6A (Optional)|
|TRIM POSITION||5 Tilt Pin Positions|
|STANDARD PROPELLER||3 x 7.5 x 6.5|
|PROPELLER SELECTION||6 – 7|